home *** CD-ROM | disk | FTP | other *** search
- Path: sn.no!not-for-mail
- From: christon (Christopher Naas)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: A4000 Audio
- Date: 10 Feb 1996 17:08:03 +0100
- Organization: SN Internett
- Message-ID: <1622.6614T1026T1168@Th0r.foo.bar>
- References: <658.6612T1383T2815@epma.demon.co.uk>
- NNTP-Posting-Host: sinsen.sn.no
- X-Newsreader: THOR 2.21 (Amiga;SOUP)
-
- andy wrote:
-
- >Im trying to find a company in the UK who can supply me with an A4000 CD
- >audio lead. I am currently using a Mitsumi FX-400 (Quad Speed) IDE Drive via
- >The internal IDE connector and the a4k_atapi drivers. The Drive works
- >excellently :-) However I get no sound :-( I need the lead which will go from
- >the back of the drive to the internal audio connector. Having tried all
- >major suppliers Ive turned up nothing :-(
- >I think the pin out (from memory) looks:
- >Drive o o o o Left Ground Ground Right
- >A4000 o o o Left Ground Right
- >ne help is much appreciated...
- I got a 4 lead wire with my CDRom. All you need to do is apply a little
- pressure to the locking mechanism to free a lead. After that it's a simple
- matter to plug it into another socket in the connector.
-
- A plug looks like this:
- ____
- | |
- |oooo|
- | |
- |____| put a small screwdriver in the little hole (represented by a 'o') and
- |||| pull the lead out. Remove one ground and place the Right audio where
- the right audio is located. You should then have a wire that looks
- like this:
-
- ____
- | |
- |oooo| <- CDRom
- | |
- |____|
- || |
- || |
- || /
- |||
- |||_
- | |
- | | <- Amiga
- |oooo|
- ----
-
- You can put a 4 connector plug on the 3 pin Amiga audio plug.
- Works for me! :)
-
- You shouldn't have any problems locating a 4 pin plugged lead if you
- didn't receive one with your CDRom.
-
-
-
- --
- Christopher Landmark Naas o EMail: christon@sn.no
- LoungeBar Development o WWW: http://www.sn.no/~christon/
- Former Reg. Amiga Developer o IRC: KarmaComa
-